VideoWave Digital 5.6GHz

RDT VTX4056A Digital VideoWaveVideoWave Digital & IP systems are based on the 802.11a WLAN technology, especially adapted for transmitting video and telemetry in the 5.5GHz to 5.7GHz license free band. The system is flexible, offering various configurations from simple point to point, to multiple camera applications, with telemetry for full PTZ control included as standard.  The key feature of the RDT system, is the ease of use, with simple set-up procedures, which require no specialist networking knowledge.

There are two different system options, using either IP cameras or using standard analogue cameras with H.264 encoders and decoders. If you are using IP cameras, then you only require the radio network components from RDT. Alternatively, you can use standard analogue cameras with the addition of the RDT encoders and decoders.  Using IP cameras will require NVR software or similar at the receiving control centre. The advantage of the digital system with encoders and decoders, is that conventional DVR, controllers and monitors can be used. Note that it is also possible to construct a hybrid system with a mix of IP and analogue cameras.

Download datasheet

Features

  • Designed for the CCTV Market
  • Point to Point or Multi-camera
  • Easy Installation and Set-up
  • RS485 for full PTZ control
  • Two-way Audio option
  • 11 Non-interfering channels
  • DPC Dynamic Power Control
  • Signal Strength indication
  • Encryption for secure transmission
  • IP67 Weatherproof Enclosures

Applications

VideoWave Digital systems are ideal for use in many CCTV applications where conventional cable solutions would be difficult or expensive. They can for example be used over distances in excess of 20km, where obviously cabling would not be an option. In other areas, such as town centres, wireless solutions save the disruption caused by digging trenches for underground cables.

Another ideal use is in temporary installations, such as construction sites or for traffic monitoring during road works. Equipment can be installed and then moved as work progresses. At the end of the project, equipment can re-deployed to other sites.

Because of the high quality images, the system is ideal for general surveillance, where the data is being recorded for later use as evidence.

Power Supply

The PSU4056 is a suitable 12V DC supply in an IP67 housing.

Download datasheet

Antennas

There is a range of antennas available for various applications. Some units are supplied with integral panel antennas but we also offer models with external antenna connectors. This allows the use of omni-directional antennas for multi-transmitter networks.

View details

© 2012, Radio Data Technology Limited, UK